Miele PWM 908 User Manual

5. Adding detergent
29
There are several options for adding de-
tergent to the washing machine.
Detergent drawer
You can use any detergent that is suit-
able for washing machines.
Detergent dispensing
Please follow the detergent manufac-
turer's instructions in relation to
dosage.
Adding too much detergent will lead
to excessive foaming.
Avoid adding excess detergent.
The amount to dispense will depend on:
– the amount of laundry
– the amount of soiling in the laundry
– the water hardness
Hardness
range
Hardness
inmmol/l
Degree of
German hardness
°dH
I (soft) 0-1.5 0-8.4
II (medium) 1.5-2.5 8.4-14
III (hard) above 2.5 above 14
Check with your local water supplier if
you do not know the water hardness in
your area.
Adding detergent
 Pull out the detergent drawer and add
detergent to the compartments.
 Detergent for the pre-wash (di-
vide the total recommended
amount as follows: ⅓ to com-
partment and ⅔ to compart-
ment)
 Detergent for the main wash
/

Fabric conditioner, liquid starch
or capsules
For disinfection programmes, the
compartments  and  can be
filled with detergent for the main wash
if you have not selected pre-wash.

Miele PWM 908 Specifications

General

Door hinge	Right
Water fill	Cold, Hot
Drum volume	73 L
Control type	Touch
Loading type	Front-load
Certification	CE, VDE-EMV, VDE, WEEE, IPX4
Product color	Silver
Built-in display	Yes
Custom panel-ready	-
Door opening angle	167 °
Appliance placement	Freestanding
Package depth	768 mm
Package width	660 mm
Package height	940 mm
Package weight	107000 g
Current	10 A
Connected load	5500 W
AC input voltage	400 V
AC input frequency	50 Hz
Water consumption per cycle	- L
Energy consumption washing per cycle	- kWh
Drum capacity	8 kg
Delay start (max)	96 h
Spin-drying class	A
Maximum spin speed	- RPM
Noise level (spin)	70 dB
Noise level (wash)	46 dB

Weight and Dimensions

Depth	714 mm
Width	605 mm
Height	850 mm
Weight	103000 g