Miele PWM 908 - Display off Status; Machine off Status; Delay Start; Memory

Supervisor level
88
"Display" off status
The display switches off to save en-
ergy. The Start/Stop sensor control
flashes slowly.
Changing this setting leads to increased
energy consumption.
Off
The display does not switch off.
On (10 min.) Not curr.prog.
The display will remain on while the pro-
gramme is running but will go out
10minutes after the end of the pro-
gramme.
Logo (10 min.) Not curr.prog.
The display stays switched on while the
programme is running. The logo lights
up 10minutes after the end of the pro-
gramme.
On after 10 min.
The display will go out after 10minutes.
On (30 min.) Not curr.prog.
The display will remain on while the pro-
gramme is running but will go out
30minutes after the end of the pro-
gramme.
Logo (30 min.) Not curr.prog.
The display stays switched on while the
programme is running. The logo lights
up 30minutes after the end of the pro-
gramme.
On after 30 min.
The display will go out after 30minutes.
"Machine" off status
In order to save energy, the washing
machine will switch off automatically
after the end of the programme or if no
further selection is made. You can
change this setting.
Changing this setting leads to increased
energy consumption.
– The machine does not switch off
– The machine switches off after
15minutes (factory default)
– The machine switches off after
20minutes
– The machine switches off after
30minutes
Delay start
The delay start (timer) display can be
switched on or off.
Factory setting: On
Memory
The washing machine will save the
settings (temperature, spin speed and
some of the options) which have been
selected for a programme after the
programme has started.
When the programme is chosen again,
the saved settings will appear in the
display.
Factory default: Off