Miele PWM 908 User Manual

Operating the washing machine
15
Fascia panel
a
Language sensor control
For selecting the current user lan-
guage.
The operating language is displayed
again at the end of the programme.
b
Back sensor control 
For going back one level in the menu.
c
Touch display
d
Sensor control Start/Stop
For starting the programme selected
and cancelling a programme once it
has started. The programme selected
can be started as soon as the sensor
control starts flashing.
e
Optical interface
For service technicians.
f
Button 
For switching the washing machine
on and off. To save energy, the wash-
ing machine will switch off automat-
ically. It is switched off 15minutes
after the end of the programme/anti-
crease phase, or after being switched
on if no further selection is made.

Miele PWM 908 Specifications

General

Door hinge	Right
Water fill	Cold, Hot
Drum volume	73 L
Control type	Touch
Loading type	Front-load
Certification	CE, VDE-EMV, VDE, WEEE, IPX4
Product color	Silver
Built-in display	Yes
Custom panel-ready	-
Door opening angle	167 °
Appliance placement	Freestanding
Package depth	768 mm
Package width	660 mm
Package height	940 mm
Package weight	107000 g
Current	10 A
Connected load	5500 W
AC input voltage	400 V
AC input frequency	50 Hz
Water consumption per cycle	- L
Energy consumption washing per cycle	- kWh
Drum capacity	8 kg
Delay start (max)	96 h
Spin-drying class	A
Maximum spin speed	- RPM
Noise level (spin)	70 dB
Noise level (wash)	46 dB

Weight and Dimensions

Depth	714 mm
Width	605 mm
Height	850 mm
Weight	103000 g