Miele PWM 908 User Manual

Timer
34
Before the programme starts, the timer
can be used to select a programme
start time or programme end time.
Setting the timer
 Touch the  Timer sensor control.
 Select the option Finish at, Start in or
Start at.
 Set the hours and the minutes with
the OK sensor control.
Changing the timer
The selected delay start time period can
be changed before the programme
start.
 Touch the ,  or  sensor con-
trol.
 If required, change the specified time
and confirm with the OK sensor con-
trol.
Deleting the timer
The selected delay start period can be
cancelled before the programme starts.
 Touch the ,  or  sensor con-
trol.
The selected delay start period will ap-
pear in the display.
 Touch the Delete sensor control.
 Confirm with the OK sensor control.
The selected delay start period is de-
leted.
Starting the timer
 Touch the Start/Stop sensor control.
The door will lock and the time until the
programme starts will appear in the dis-
play.
After the programme has started, the
selected delay start period can only be
changed or cancelled by interrupting
the programme.
The programme can now be started at
any time.
 Touch the Start immediately sensor
control.

Miele PWM 908 Specifications

General

Door hinge	Right
Water fill	Cold, Hot
Drum volume	73 L
Control type	Touch
Loading type	Front-load
Certification	CE, VDE-EMV, VDE, WEEE, IPX4
Product color	Silver
Built-in display	Yes
Custom panel-ready	-
Door opening angle	167 °
Appliance placement	Freestanding
Package depth	768 mm
Package width	660 mm
Package height	940 mm
Package weight	107000 g
Current	10 A
Connected load	5500 W
AC input voltage	400 V
AC input frequency	50 Hz
Water consumption per cycle	- L
Energy consumption washing per cycle	- kWh
Drum capacity	8 kg
Delay start (max)	96 h
Spin-drying class	A
Maximum spin speed	- RPM
Noise level (spin)	70 dB
Noise level (wash)	46 dB

Weight and Dimensions

Depth	714 mm
Width	605 mm
Height	850 mm
Weight	103000 g