Supervisor level
85
Opening Supervisor level
Switch on the washing machine.
11:02
Programmes Favourites Supervisor
Help
Touch the Supervisor sensor con-
trol.
The display will change to the Supervisor
level menu
Code-based access
Supervisor level is accessed using a
code.
The code is 000 (factory default).
Changing the code
You can alter the Supervisor level ac-
cess code to protect the washing ma-
chine from unauthorised access.
Please inform Miele Service if you
have forgotten your new code. Miele
Service will have to reset the code.
Make a note of your new code and
store it in a safe place.
Closing the settings menu
Touch the sensor control.
The display will then go back to the pre-
vious menu level.
Touch the sensor control.
The display will change to the main
menu.
To Next Page
Loading...
