Miele PWM 908 User Manual

5. Adding detergent
31
CapDosing
3 different types of capsule are avail-
able:
 = Fabric care (e.g. fabric condi-
tioner, proofing agent)
 = Additives (e.g. detergent en-
hancer)
 = Detergent (for the main wash
only)
Only one capsule can be selected per
wash programme.
Depending on the setting selected, the
detergent, additive or fabric care agent
will be dispensed via the capsule for
this wash programme.
Each capsule contains the correct
amount for one wash cycle.
Caps are available to order from the
Miele online shop, Miele customer ser-
vice or your Miele retailer.
 Capsules pose a health risk.
The ingredients of capsules can be
hazardous to health if they are swal-
lowed or come into contact with
skin.
Keep capsules out of the reach of
children.
Activating CapDosing
 Touch the CapDosing sensor control.
The types of capsules which can be
used with the programme will appear in
the display.
 Select the type of capsule you want.
CapDosing is now active.
The display switches to the default dis-
play and shows the selected cap.
Inserting a capsule
 Open the detergent drawer.
 Open the lid of the / compart-
ment.
 Press the capsule in firmly.

Miele PWM 908 Specifications

General

Door hinge	Right
Water fill	Cold, Hot
Drum volume	73 L
Control type	Touch
Loading type	Front-load
Certification	CE, VDE-EMV, VDE, WEEE, IPX4
Product color	Silver
Built-in display	Yes
Custom panel-ready	-
Door opening angle	167 °
Appliance placement	Freestanding
Package depth	768 mm
Package width	660 mm
Package height	940 mm
Package weight	107000 g
Current	10 A
Connected load	5500 W
AC input voltage	400 V
AC input frequency	50 Hz
Water consumption per cycle	- L
Energy consumption washing per cycle	- kWh
Drum capacity	8 kg
Delay start (max)	96 h
Spin-drying class	A
Maximum spin speed	- RPM
Noise level (spin)	70 dB
Noise level (wash)	46 dB

Weight and Dimensions

Depth	714 mm
Width	605 mm
Height	850 mm
Weight	103000 g