Miele PWM 908 - Page 41

Programme chart
41
Proofing 30°C to 40°C Max. load 3.5 kg
Use for Treating microfibre fabric, skiwear and table linen made from
mainly synthetic fibres
Tip – Add proofing agent to the  compartment .
– The items should be freshly laundered and spun or dried before
proofing.
– To achieve an optimum effect, apply a thermal treatment to the
articles by drying in a tumble dryer or ironing.
1000rpm Extras: Rinse hold Rinses: 1
Wellness/Hair salons
Towels Cold to 40°C Max. load 6.0 kg
Use for Lightly soiled cotton towelling
Tip Use a colour detergent for dark textiles.
1400rpm Rinses: 2
Towels plus 40°C to 80°C Max. load 6.0 kg
Use for Heavily soiled cotton towelling
Tip Use a colour detergent for dark textiles.
1400rpm Extras: Pre-wash Rinses: 2
Capes Cold to 30°C Max. load 2.5 kg
Use for Lightly soiled hairdressers' capes made from synthetic fibres
Tip Select the Extra Rinse plus for extra good wash results
600rpm Extras: Rinse plus Rinses: 2
Hotels
Bed linen 40°C to 90°C Max. load 8.0 kg
Use for Cotton or mixed fibre bed linen
Tip – The items are always soaked after the start.
– Use a colour detergent for coloured textiles.
1200rpm Extras: Pre-wash, Soak, Rinse plus, Pre-iron-
ing
Rinses: 2