Miller Copilot User Manual

OM-291865 Page 11
SECTION 3 – DEFINITIONS
3-1. Additional Safety Symbol Definitions
Warning! Watch Out! There are possible hazards as shown by the
symbols.
OM-
U
se ventilating fan to remove fumes.
Safe10 2012 05
Use ventilating fan to remove fumes.
Safe11 2012 05
Keep flammable
s away from welding. Do not weld near flammables.
Safe12 2012 05
Keep flammable
s away from cutting. Do not cut near flammables.
Safe13 2012 05
W
elding
s
parks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
Safe14 2012 05
Cutting sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
Safe15 2012 05
D
o not weld on drums or any closed containers.
Safe16 2017 04
D
o not cut on drums or any closed containers.
Safe17 2017 04
D
o not grip material near cutting path.
Safe18 2017 10
T
urn off power before disassembling torch.
Safe19 2012 05
Do not remove or paint over (cover) the label.
Safe20 2017 04
Do not remove or paint over (cover) the label.
Hazardous voltage; electric shock can kill.
Hazardous voltage; electric shock can kill.
Moving parts can injure. Keep away from positioning arm when it is
being moved.
3-2. Miscellaneous Symbols
Amperage
Voltage
Hertz
Single Phase
Three Phase
Rated Supply
Voltage
Rated Supply
Current
Rated Maximum
Supply Current
Maximum Effective
Supply Current
Ground
On
Off
Power On/Off
Lockout
Pushbutton In
Pushbutton Out
Isolating Switch
Disconnector

Miller Copilot Specifications

General

Brand	Miller
Model	Copilot
Category	Welding System
Language	English