111
Replacing the Quantum Cartridge, Continued
Placing
Follow the steps below to install a new Quantum Cartridge.
Step Action Diagram
1
• Remove the covers on the 2
ports of the Quantum
Cartridge.
• Wet the O-rings with water.
2
• Install the Quantum Cartridge
until it is fully seated.
• Close the right door.
3 When a new Quantum
Cartridge is installed, the LCD
looks like this.
4
Press .
Proceed to the next set of steps to rinse the Quantum Cartridge.
Continued on next page
To Next Page
Loading...
