Millipore Milli-Q Integral 3 - Page 138

138
Summary of Alarm messages, Continued
Alarm
messages
(continued)
LCD message What it means
TANK EMPTY
• The Milli-Q System has detected
an empty Reservoir.
• Refill the Reservoir.
• Verify that the Reservoir level
sensor is plugged into the Milli-Q
System Cabinet.
WATER DETECTED
• A Water Sensor (an accessory
connected to the Milli-Q System)
has detected water. The Milli-Q
System stops operating.
• Clean up the spilled water.
• Make sure the source of the leak is
fixed.