4-7
Troubles for which error messages are given on the LCD
4
In Case of Trouble
Error message Cause Remedy
ERR60 PenEncoder
The height of the pen cannot be
detected.
Turn the power off once and turn it on
again.
If the same error message still
appears, contact your distributor or a
sales office of MIMAKI.
ERR61 Pen Stroke The height of the pen is not proper.
Check whether the pen line rubber is
not extremely worn or there is neither
lifting nor change of shape.
Check whether a foreign material
adheres on the pen line rubber.
When attaching a pen in a pen holder
in the marketplace, check whether it is
attached in the proper position.
Even if there is no abnormality in the
above mentioned items and an error is
still displayed, contact our sales office.
To Next Page
Loading...
