MIMAKI JV5 Series User Manual

4-13
Cutting out Data with Register Marks
4
Extended Functions – Cutting –
MARK TYPE
COPIES (X) / COPIES (Y)
SPEED LIMIT
Set Value Description
TYPE1
TYPE2
Select either one of the following types of register marks.
Set Value Description
1 to 9999
(COPIES X)
1 to 99
(COPIES Y)
Effective when the same pattern is multi-printed at regular intervals.
Cuts automatically the preset number of sheets while detecting register marks consecutively based
on the first data.
For leaf sheets (cut sheets), the value of [COPIES Y] is used as the
number of copies.
When the number of copies can be set on the application software, like on
the supplied FineCut, set the value to [1].
Set Value Description
0 to 30 cm/s
Set a speed limit for rapid moving in continuous copying.
During rapid moving, mark detection may not be performed correctly if a slippery medium is used. In
such a case, set a speed limit.
If no speed limit is required, set the value to "0".
TP1
TP2
TP3
TP4
TP1
TP2
TP3
TP4
MARK ： TYPE 1 MARK ： TYPE 2

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English