Chapter 1 Before Use
42
1
Mount ink bottles.
• Rotate the lever from the left to the right end, then mount the ink bottle.
• You may apply the maintenance liquid onto the O-ring of the ink bottle caps so that the ink
bottle can be inserted easily. Use the appropriate maintenance liquid to suit the ink being
used.
2
Turn the lever from right to left to secure the bottle.
• Never attempt to rotate the ink bottles. Doing so may result in leaking ink.
• Once the ink bottle is mounted, use up the ink as quickly as possible.
l
Registering the Ink IC Chip
Printing is not possible unless the ink IC chip has been registered.
• Do not touch the metal parts of the ink IC chip. Static electricity may damage the ink IC chip,
and dirt or damage may make the ink IC chip unreadable.
• Insert the ink IC chip with the metal side facing up. Inserting it in the wrong way may cause
failure of the machine or damage the ink IC chip.
1
Switch to LOCAL mode.
• Chip registration is possible only in LOCAL mode.
To Next Page
Loading...
