Chapter 1 Before Use
43
2
Insert a new ink IC chip into the ink IC chip slot on the right-hand side of the product.
• A registration screen appears when the ink IC chip is inserted.
3
Press the OK button.
• The information on the ink IC chip is registered.
Ink IC Chip Registrasion
Color:Magenta
Expiration:2021/01/01
OK
• Do not dispose of the ink IC chip. It is needed to rewrite the ink registration information on
the ink IC chip.
• If the warning message appears, take appropriate actions by referring to the following.
Message Cause Corrective action
Color: Magenta
Expiration: 2021/01/01
Caution:
XX days until expiration
• The ink expiration date is
approaching.
• Use the ink before the expiration
period.
Registered IC chip • The ink IC chip inserted is
already registered.
• Replace with a new ink IC chip.
"Registering the Ink IC Chip"(P. 42)
Unable to register.
The registration limit was
exceeded.
• More than one was
registered for each slot.
• Use up the equivalent of one bottle
before registering.
Unable to register.
XXXXXXX (Error name)
• The ink IC chip could not
be registered due to an
error.
• Insert the correct ink IC chip.
"Registering the Ink IC Chip"(P. 42)
Expiration Over • The ink is two months
past its expiration date
and cannot be used.
• Replace with new ink. Printing is not
possible. "When Ink End is
Displayed"(P. 37)
Ink Type • A different ink type is
registered on the ink IC
chip.
• Insert an ink IC chip for the correct ink
type. "Registering the Ink IC
Chip"(P. 42)
Ink Color • A different ink color is
registered on the ink IC
chip.
• Insert an ink IC chip for the correct ink
color. "Registering the Ink IC
Chip"(P. 42)
Wrong Ink IC • An error occurred with the
information on the ink IC
chip.
1. Check to confirm the ink IC chip was
inserted correctly. "Registering the Ink
IC Chip"(P. 42)
2. Turn off the main power and wait a while
before turning back on.
3. Replace with new ink. "When Ink End is
Displayed"(P. 37)
1
To Next Page
Loading...
