Chapter 1 Before Use
44
Message Cause Corrective action
Replace Ink • The ink IC chip was
registered when an ink
end or ink near-end error
occurred.
• Mount new ink and register the ink IC
chip.
• Ink IC chips
The marking on the ink IC chip indicates the color information.
Ink Color Marking
Blue
(One blue circle/one red circle)
Magenta
(One red circle)
Yellow
(One yellow circle)
Black
(One black circle)
• Insert the ink IC chip included in the package with the ink. The ink IC chip stores information
such as the ink color, remaining amount, and expiration date. Printing is not possible if an
incorrect ink IC chip is inserted.
l
Checking Ink IC Chip Registration
To check ink IC chip registration information, press the [ENTER] key in LOCAL mode screen. "Displaying
Machine Information (Local Guidance)"(P. 28)
• The expiration date and total amount of ink registered is displayed.
• "---" will appear if no ink IC chip is registered or if no ink remains. If "---" appears, a new ink IC chip can
be registered.
Ink IC Chip Reg. info.
Y：2020/01/01
C：2020/01/01
M：---
K：2020/01/01
l
Rewrite the ink registration information on the ink IC chip
You can replace with a new Ink bottle even if ink remains. If circumstances make it unavoidable to replace
the ink bottle, rewrite the ink information registered in this machine on the ink IC chip. Rewriting allows the
Ink bottle to be reused.
1
Insert the ink IC chip for the replacement Ink bottle.
• Use the ink IC chip on which the Ink bottle is registered. Other ink IC chips cannot be
used.
To Next Page
Loading...
