Chapter 4 Maintenance
4-20
2
Press to select “
MAINTENANCE
”,
and press the key.
• MAINTENANCE MENU will be displayed.
3
Press , and press the key.
• Carriage will move to the left end of this machine.
4
Press the key.
• “STATION” will be selecte
5
Open the right maintenance cover.
6
Take out the nozzle cap.
• Hold the nozzle cap and pull it out.
7
Insert the new wiper.
• Insert the nozzle cap so that its protrusion is in the
nozzle opening.
8
Close the maintenance cover, and press
the key.
• After its initial operation, the machine returns to
LOCAL.
• Insert it all the way in so that there are no gaps.
• If the nozzle opening sinks down and is difficult to
insert, support the tube from below by hand.
To Next Page
Loading...
