Mindray accutorr plus - Page 68

Accutorr Plus™ Operating Instructions 0070-10-0692-02 3 - 35
Operation User Configuration
9c Neonate Alarm Limits Set the default alarm limit
values for a Neonate size
patient. See Section 3.5 for
details on setting alarm
limits.
OFF, except
SpO
2
low
which is 86
10a Alarm Volume Set the volume of an alarm
signal. The choices are: 1,
2, 3, 4 & 5. 5 is the loudest.
4
10b SpO
2
Volume Set the volume of the SpO
2
beep. The choices are: Off
(or ——), 1, 2, 3, 4 & 5. 5
is the loudest.
OFF
11 Continuous Print Choices are ON or OFF. If
User Configuration #3 is set
to display graphics, the
choices are -l- or -O-.
OFF
12 Reset to Factory Defaults To change all of the User
Configuration items back to
the Factory Defaults, while
in User Config. #12, press
and hold the START NIBP
key for 3 seconds.
USER
CONFIGURATION
NUMBER FUNCTION DESCRIPTION
FACTORY
DEFAULT