Measure Preset 2-15
2.4.2.2 Measurement Package Preset
During measurement, the preset package displays in menu and touch screen. Items in package
are presettable and may belong to different application region.
Click [Advanced] to enter the following page.
Where,
[Available Items]: shows application packages configured in the system but not assigned to the
current mode yet.
[Selected Items]: shows application packages assigned to the current exam mode. If more
than one package is assigned to the current exam mode, you can switch measurement
package via the menu title in the measuring status.
The package editing includes Creating Package, Add/ Remove the item, Deleting Measurement
Package, Setting Default Package, Adjusting Package Position.
Creating Package
1. Click [New].
2. Input name for the new package in the dialog box pop up.
3. Click [OK] to confirm.
New package displays in the [Available Items] list as shown in the following figure.
Adding/ Removing Package
Adding/ removing the package by pressing:
[>]
To add the package selected from the [Available Items] into the [Selected
Items].
[>>]
To add all packages (need not be selected) in the [Available Items] into the
[Selected Items].
[<]
To remove the package selected from the [Selected Items] to the [Available
Items].
[<<]
To remove all packages (need not be selected) in the [Selected Items] to the
[Available Items].
To Next Page
Loading...
Need help?
General
