Why is the circuit breaker tripping on my Mindray DC-8 EXP?
If the circuit breaker is tripping when using your Mindray Medical Equipment, it could be due to a malfunction on the AC-DC power. Replace the AC-DC assembly to resolve this.
Why is the AC indicator off on my Mindray DC-8 EXP Medical Equipment?
If the AC indicator is off on your Mindray Medical Equipment, it could be due to two reasons: either AC power is not being input, or there is a malfunction on the AC-DC power. First, check the connection of the AC power. If the connection is fine, then replace the AC-DC assembly.
Guides users through the initial steps for configuring system presets before measurements.
Details how to configure specific measurement parameters like rulers and cursors.
Explains the settings and configurations specific to obstetric measurements and calculations.
Outlines the fundamental steps for performing general measurements on the system.
Details the necessary steps and checks before commencing an abdominal exam.
Guides users through the core procedures for taking abdominal measurements.
Outlines the setup and preparatory steps for obstetric examinations.
Details the fundamental procedures for taking obstetric measurements.
Explains Gestational Age calculation methods, including clinical and ultrasound GA.
Lists and describes the specialized measurement tools for obstetric applications.
Details the operational procedures for utilizing obstetric measurement tools.
Guides on performing measurements and managing data for multiple fetuses.
Details the necessary preparations before conducting cardiac examinations.
Outlines the fundamental steps for performing cardiac measurements.
Lists and describes the various measurement tools specific to cardiac imaging.
Explains the operational procedures for using cardiac measurement tools.
Details the preparatory steps required before performing vascular examinations.
Explains the operational procedures for performing HIP measurements.
General| Touch Panel | Yes |
|---|---|
| Operating System | Windows-based |
| Operating Temperature | +10°C to +40°C |
| Transducer Ports | 4 |
| Imaging Modes | B, M, Color, Power, PW, CW |
| Advanced Imaging Technologies | iClear |
| Type | Ultrasound System |
| Probe Connectors | 4 |
| Power Supply | 100-240VAC ±10%, 50/60Hz |
| Power Consumption | 500 VA |
| Storage Temperature | -20°C to +55°C |
| Relative Humidity | 30% to 80% (non-condensing) |
To Next Page
