Mindray DC-80 User Manual

Safety Precautions 1-9
NOTE:
Read the following precautions to prevent the probe from malfunction:
 Before connecting or disconnecting the probe, freeze or turn off the diagnostic
ultrasound system.
 Clean and disinfect the probe before and after each examination.
 After the examination, wipe off the ultrasound gel thoroughly. Otherwise, the
ultrasound gel may solidify and the image quality would be degraded.
Ambient conditions:
1. To prevent the probe from being damaged, do not use it where it will be exposed
to:
 Direct sunlight or X-rays
 Sudden changes in temperature
 Dust
 Excessive vibration
 Heat generators
2. Use the probes under the following ambient conditions:
 ambient temperature: 0°C to 40°C
 relative humidity: 30% to 85% (no condensation)
 atmospheric pressure: 700 hPa to 1060 hPa
3. Use the SP5-1E/C6-2GE/LM14-6E/L9-3E/V11-3HE probe under the following
ambient conditions:
 ambient temperature: 0°C to 40°C
 relative humidity: 20% to 85% (no condensation)
 atmospheric pressure: 700 hPa to 1060 hPa
4. Use the L14-5WE probe under the following ambient conditions:
 ambient temperature: 0°C to 35°C
 relative humidity: 15% to 80% (no condensation)
 atmospheric pressure: 700 hPa to 1060 hPa
5. Use the DE10-3E/DE11-3E probe under the following ambient conditions:
 ambient temperature: 18°C to 30°C
 relative humidity: 30% to 85% (no condensation)
 atmospheric pressure: 700 hPa to 1060 hPa
6. Use the D6-2NE probe under the following ambient conditions:
 ambient temperature: 15°C to 40°C
 relative humidity: 30% to 85% (no condensation)
 atmospheric pressure: 700 hPa to 1060 hPa
7. Use the L16-4HE/D7-2E probe under the following ambient conditions:
 ambient temperature: 10°C to 40°C
 relative humidity: 30% to 85% (no condensation)
 atmospheric pressure: 700 hPa to 1060 hPa
8. Use the D8-2E probe under the following ambient conditions:
 ambient temperature: 18°C to 30°C
 relative humidity: 10% to 90% (no condensation)
 atmospheric pressure: 700 hPa to 1060 hPa
Repeated disinfection will eventually damage the probe, please check the probe
performance periodically.

Mindray DC-80 Specifications

General

Imaging Modes	B, M, Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler, Tissue Doppler, 3D/4D Imaging
Probes	Convex, Linear, Phased Array, Volume
Advanced Features	Auto Optimization, Auto EF
Connectivity	DICOM 3.0, USB, HDMI, VGA, Ethernet
Transducer Ports	4
Applications	Abdominal, Cardiac, Obstetrics/Gynecology, Vascular, Small Parts, Musculoskeletal, Urology, Pediatrics, Neonatal
Transducer Types	Convex, Linear, Phased Array, Volume
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 60°C
Humidity	30% to 80%