Mindray DC-80 User Manual

Probes and Biopsy 13-7
Procedures for operating (with no biopsy function):
Inspection before examination
Connection to the ultrasonic
diagnostic system
Examinations
Wiping off the ultrasound gel
Washing the
transducer with water
Draining/drying
Immersion into disinfectant
Removing the transducer
from disinfectant
Rinsing the transducer into sterile water
Draining/drying
Inspection after use
Storage
Disinfection
Disconnection to the ultrasonic
diagnostic system
WARNING:
Disinfect the probe and sterilize the needle-guided bracket before
and after an ultrasound-guided biopsy procedure is performed.
Failure to do so may cause the probe and the needle-guided bracket
become a source of infection.

Mindray DC-80 Specifications

General

Imaging Modes	B, M, Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler, Tissue Doppler, 3D/4D Imaging
Probes	Convex, Linear, Phased Array, Volume
Advanced Features	Auto Optimization, Auto EF
Connectivity	DICOM 3.0, USB, HDMI, VGA, Ethernet
Transducer Ports	4
Applications	Abdominal, Cardiac, Obstetrics/Gynecology, Vascular, Small Parts, Musculoskeletal, Urology, Pediatrics, Neonatal
Transducer Types	Convex, Linear, Phased Array, Volume
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 60°C
Humidity	30% to 80%