System Maintenance 17-5
Be sure to use soft brush to brush the dust attached to all the sockets or interfaces which
can be seen (such as probe sockets, sockets or interfaces in IO panel and power supply
panel),not the cloth with water.
Cleaning the peripherals
Do the cleaning maintenance according to your actual peripheral configuration; items which are
not configured can be skipped.
Color and B/W
video printer
First wipe off dust or stain attached to the cover of printer with soft dry cloth,
then clean the inside of printer. Be sure to do the cleaning maintenance
according to the operation manual if is necessary.
First wipe off dust or stain attached to the cover of printer with soft dry cloth,
then clean the inside of printer. Be sure to do the cleaning maintenance
according to the operation manual if is necessary.
Use soft dry cloth with a little mild soap water to wipe off the dust or stain
attached to the pedals or cable of foot switch.
First use soft dry cloth to wipe off dust attached to glass panel of the reader,
then the dust or strain attached to cable and bracket. Refer to Appendix E
Barcode Reader for details.
17.1.2 Checking the Probe
Visually check to confirm that there is no crack and expansion to probe head.
Visually check to confirm that there is no deterioration or desquamation to probe cable.
Visually check to confirm that there is no bend, destroyed or falling off pins to the connector.
17.1.3 Checking the Power Cable and Plug
Visually check to confirm that there is no wrinkles, crack or deterioration; No crack and
expansion to the surface of adapter.
Manually check to confirm that there is no looseness or rupture. The connection of plug is
reliable.
17.1.4 Checking the Circuit Breaker
Manually check to confirm that the circuit breaker can be turned on or off normally.
17.1.5 Checking Appearance
Check if there is any crack in the covers:
Ultrasound system covers
Probe appearance
External appearance of ECG lead
17.1.6 Backup of the System Hard Drive
To prevent deterioration or loss of data stored in the system hard drive data (including patient info
data, preset data and etc.), create a backup copy of the hard drive at regular intervals.