Mindray DC-80 User Manual

System Preparation 3-9
3.3.2 Monitor Brightness/Contrast Adjustment
Monitor brightness and contrast adjustment is one of the most important factors for proper image
qualities, if set incorrectly, the gain, TGC, dynamic range or even acoustic output have to be
changed more often than necessary to compensate.
 Brightness adjustment:
Press <F10 Setup>. Click [System][General] [LCD] and tap the brightness adjustment on
the touch screen. Tap to reduce and to enhance the brightness.
 Contrast adjustment:
Press <F10 Setup>. Click [System][General] [LCD] and tap the contrast adjustment on the
touch screen. Tap to reduce and to enhance the contrast.
NOTE:
On the monitor, the brightness adjustment comes before contrast. After readjusting the
monitor’s contrast and brightness, adjust all preset and peripheral settings.

Mindray DC-80 Specifications

General

Imaging Modes	B, M, Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler, Tissue Doppler, 3D/4D Imaging
Probes	Convex, Linear, Phased Array, Volume
Advanced Features	Auto Optimization, Auto EF
Connectivity	DICOM 3.0, USB, HDMI, VGA, Ethernet
Transducer Ports	4
Applications	Abdominal, Cardiac, Obstetrics/Gynecology, Vascular, Small Parts, Musculoskeletal, Urology, Pediatrics, Neonatal
Transducer Types	Convex, Linear, Phased Array, Volume
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 60°C
Humidity	30% to 80%