Mindray DC-80 User Manual

3-16 System Preparation
4. Load a paper roll, and turn on the system and printer.
5. Modify print service:
 Add a print service:
(1) Open the [Setup]-> [Print]->[Print Service] screen.
(2) Click [Add Service] to enter the page.
(3) Select the service type and enter the service name manually.
(4) Click OK to return to the Printer Service page.
(5) Select the printer model, and then you can set the properties in the Property box.
(6) Click [Save] to complete the setting.
 Modify print service:
(1) Select an existed printer service in the list.
(2) Select the printer model, and then you can set the properties in the Property box.
(3) Click [Save] to complete the setting.
3.6.6 Installing Digital Video Printer
1. Put the printer in a proper place.
2. Plug the printer power cord to an appropriate outlet.
3. Use a USB cable to connect between the USB port of the system and the USB port of the
printer.
4. Load a paper roll, and turn on the system and printer.
5. See section ―3.6.5 Installing Analog Video Printer‖ for driver installation procedure (drivers of
printers listed in the ―2.5.4 Peripherals Supported‖ chapter are installed already).
 Add a print service:
(1) Open the [Setup]-> [Print]->[Print Service] screen.
(2) Click [Add Service] to enter the page.
(3) Select the service type and enter the service name manually.
(4) Click [OK] to return to the Printer Service page.
(5) Set printing properties.
(6) Click [Save] to complete the setting.
 Modify print service:
(1) Select an existed printer service in the list.
(2) Select the printer model, and then you can set the properties in the Property box.
(3) Click [Save] to complete the setting.

Mindray DC-80 Specifications

General

Imaging Modes	B, M, Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler, Tissue Doppler, 3D/4D Imaging
Probes	Convex, Linear, Phased Array, Volume
Advanced Features	Auto Optimization, Auto EF
Connectivity	DICOM 3.0, USB, HDMI, VGA, Ethernet
Transducer Ports	4
Applications	Abdominal, Cardiac, Obstetrics/Gynecology, Vascular, Small Parts, Musculoskeletal, Urology, Pediatrics, Neonatal
Transducer Types	Convex, Linear, Phased Array, Volume
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 60°C
Humidity	30% to 80%