Mindray DC-80 User Manual

Image Optimization 5-21
Color Map
Description
This feature indicates the display effect of Power image.
The maps in the Power mode image are grouped into two categories: Power maps
and Directional Power maps.
Operations
To select among the maps, turn the knob under [Color Map] on the touch screen.
There are 8 kinds of maps provided: P0-3 belong to Power mode maps, while
Dp0-3 belong to Directional Power mode maps.
The Power maps provide information of blood flow, which are highly sensitive to
the low-velocity flows.
The Directional Power maps provide information of flow direction.
Dynamic Range
Description
This function is to adjust the transformation of echo intensity into color signal.
Operations
Rotate the knob under the [Dyn Ra.] item on the touch screen to adjust the
dynamic range.
Effects
Increasing dynamic range will lead to higher sensitivity to low-power signals, thus
enhances the range of signals to display.

Mindray DC-80 Specifications

General

Imaging Modes	B, M, Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler, Tissue Doppler, 3D/4D Imaging
Probes	Convex, Linear, Phased Array, Volume
Advanced Features	Auto Optimization, Auto EF
Connectivity	DICOM 3.0, USB, HDMI, VGA, Ethernet
Transducer Ports	4
Applications	Abdominal, Cardiac, Obstetrics/Gynecology, Vascular, Small Parts, Musculoskeletal, Urology, Pediatrics, Neonatal
Transducer Types	Convex, Linear, Phased Array, Volume
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 60°C
Humidity	30% to 80%