Mindray M7Vet - Power ON; off

7
4 Power ON/ OFF
CAUTION:
1.
To ensure safe and effective system operation, you
must perform daily maintenance and checks.
2.
If the system begins to function improperly –
immediately stop scanning. If the system continues
to function improperly – fully shut down the system
and contact Mindray Customer Service Department
or sales representative. If you use the system in a
persistent improperly functioning state – you may
harm the animal or damage the equipment.
 Power ON
1.
Connect the system to the power supply through the power adapter.
2.
Press the power button to turn on the system and the power indicator
is on in green color.
Or press
directly when the batteries are of sufficient capacity.
 To power off your system normally:
Gently press the power button
once on the upper right corner of the control
panel. The [Shutdown Confirm] screen appears as the following:
z Shut down：To power off the system.
z Quick Off：Click to power off the system quickly, which is also referred to as
hibernation. This function enables the system to restart quickly.
z Cancel：To cancel the operation.
If you will not use the system for a long period of time, you shall disconnect the power
adapter; disconnect the mains power; turn off powers of all peripherals connected to
the system.
 To shut down the system in a direct way if you cannot do it normally:
Press and hold the power button for a long time and the system will power off without
displaying the [Shutdown Confirm] screen. Shutting down the system this way may
destroy the data.
NOTE:
DO NOT rush shutdown of the system in a direct way. It may destroy the
data. DO NOT directly shut down the system. It may corrupt the data.