Mindray M7Vet - Color M Mode

24
16 Color M Mode
 Enter Color M mode
z Color Flow M mode
h
In B+M Mode, press <Color>.
h In B+Color, B+ Color+ Pw or B+ Color+ CW mode, press <M>.
z Color Tissue M mode(TVM)
h
In Color Flow M mode, click [TDI]
h In B+TVI/TVD, or B+TVI+TVD mode, press <M>.
h In Color Flow M mode, click [TDI] in the soft menu or press the user-
defined TDI key.
 Exit Color M Mode
z Press <Color> or <M> on the control panel to exit Color M mode.
z Or, press
on the control panel to return to B mode.
 ROI Adjustment
The ROI size and position determine the size and position of the color flow or color
tissue displayed in the Color M mode image.
z Set the position of the sampling line by moving the trackball left and right, and
set the ROI position by moving the trackball up and down.
z Set the ROI size by moving the trackball up and right.
z Press
to switch between the cursor status between the ROI position
adjustment and ROI size adjustment.
 Press
on the control panel to switch between the real-time mode and
freeze mode.