37
25 Setup
To change the factory default settings, perform setup operations.
Press
to enter the setup screen, click the item to enter the corresponding
screen:
z [System Preset]: to preset settings for general information and functions.
z [Exam Preset]: to preset exam modes for probes, and the specific image,
measurements, comment and body marks setting.
z [Image Preset]: to preset image parameters for the specific exam modes.
z [Measure Preset] & [Comment Preset] & [Body Mark Preset]: to preset for
specific exam modes.
z [Network Preset]: to set for network connection properties.
z [Peripheral Preset]: to set for printers and DVR and etc.
Setup data management
Select [Manage Settings] on the Setup menu to display setup data manage screen:
z Select the desired setup data in the Export field, and click [Export] to export
the selected data.
z Select the desired setup data in the Import field:
h
To restore the factory setup data, click [Restore Factory] in the Import
field.
h
Click [Import] in the Import field to import the desired setup data.
z Click [Import All] or [Export All] to import or export all setup data.
z To restore all the factory setup data, click [Restore Factory] at the bottom of
the screen.
To view and save system information
Select [System Information] in the Setup menu:
z View detailed information.
z Click [Save] to export system information.
To Next Page
Loading...
