Mindray M7Vet - Comments and Body Marks

33
22 Comments and Body Marks
To add a comment:
1.
Enter comment status:
z Press
; or,
z Press any alphanumeric key to enter the comment status, and the
corresponding letter or numeral is displayed besides the cursor; Or,
z Press
to enter the arrow-adding status.
2.
Set the comment adding position.
3.
Add comment to the image. Here, you can modify, move or delete a completed
comment.
4.
Exit comment:
z In the comment status, press
.
z In the arrow-adding status, press
.
z Press
or other mode key.
Trace
1.
In comment status, click [Trace] in the soft menu to activate trace.
2.
Roll the trackball to a desired position, and press to confirm the start point.
3.
Roll the trackball to move the cursor along the edge of the desired region and
trace the outline of the region.
z Rotate the multifunctional knob anticlockwise, to cancel trace of 1 pixel.
z Rotate the multifunctional knob clockwise, to restore trace of 1 pixel.
z Press <Clear> to clear the trace(s).
4.
Press to finish a tracing.