Mindray M7Vet - Measurements

35
23 Measurements
You can perform measurements on a:
z zoomed image
z cine review image
z real-time image
z frozen image
The measurements consist of general measurements and application measurements.
 General Measurements
1.
On the image, press the user-defined key to enter the general measurement
status, the corresponding menu is displayed.
2.
Move the cursor onto the measurement tool, and press .
3.
Move the cursor onto the desired position and press to fix the
measurement caliper, or press
to cancel the operation.
 Application Measurements
1.
On the image, press to enter the application measurement status, the
corresponding menu is displayed.
2.
Move the cursor onto the measurement tool and method, and press .
3.
Move the cursor onto the desired position and press to fix the
measurement caliper, or press
to cancel the operation.
Refer to the help information displayed below the image during a measurement.
CAUTION:
During a measurement, if you unfreeze the image or
change the exam mode, the measurement calipers
will be cleared and general measurement data will be
lost (the application measurement data are stored in
the report).