C
Crystal NelsonAug 30, 2025
Why does my Mindray Medical Equipment report 'Storage Card Err'?
- TTyler PachecoAug 30, 2025
If a 'Storage Card Err' is reported, it indicates an SD card error. Restart T1. If the problem persists, format the SD card.
To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...Why does my Mindray Medical Equipment report 'Storage Card Err'?
If a 'Storage Card Err' is reported, it indicates an SD card error. Restart T1. If the problem persists, format the SD card.
Why is the display blank or black on my Mindray T1 Medical Equipment?
If the display is blank or black, it could be due to: * A loose display connection cable. Properly connect the display connection cable. * A defective display. Replace the front housing assembly.
How to fix touchscreen accuracy issues on Mindray T1?
If the touchscreen accuracy is off, calibrate the touchscreen.
Why is my Mindray Medical Equipment touchscreen not responding?
If the touchscreen is not responding, the display may be defective, and you should replace the front housing assembly.
General| Category | Patient Monitor |
|---|---|
| Battery Life | Up to 4 hours |
| Imaging Modes | Not applicable |
| SpO2 | Yes |
| Pulse Rate | Yes |
| ECG | Yes |
| NIBP | Yes |
| Temperature | Yes |
| Parameters | ECG, SpO2, NIBP, Temperature, Respiration |
| Connectivity | USB, Ethernet, Wi-Fi |
Details on warnings, cautions, and notes for safe operation and handling of the patient monitor.
Procedures for upgrading the monitor's hardware, including IBP, ECG, and Wi-Fi functions.
Procedures for various performance tests including ECG, SpO2, NIBP, and others.
Tests for power-on, touchscreen calibration, battery, and network printing functionality.
Steps to access and utilize the factory maintenance menu for advanced settings.
Guide to identifying and resolving common problems with the patient monitor.
Specific tests and limits for electrical safety inspection as per standards.
