T1 Service Manual 3-7
3.2.8 Certificates Maintenance
WPA)/WPA2 Enterprise can deliver a higher level of security compared with other security encryption modes such as WPA2
PSK. You need to import the desired certificates to the monitor before implementing WPA/WPA2 Enterprise encryption on
your WLAN. If you do not need to use certificates, you can also delete them from the monitor.
3.2.8.1 Importing Certificates
To import certificates to the monitor:
1. Create a folder named “cert” in the USB drive
2. .Copy the certificates to the “cert” folder.
3. Insert the USB drive into the monitor’s USB port.
4. Select [Main Menu]→[Maintenance>>]→[User Maintenance>>]→enter the required password.→[Network
Setup >>]→[Certificates Maintenance >>]→[Import certificates>>].
5. Select the desired certificates and then select [Import].
3.2.8.2 Deleting Certificates
To delete certificates from the monitor:
1. Select [Main Menu]→[Maintenance>>]→[User Maintenance>>]→enter the required password.→[Network
Setup >>]→[Certificates Maintenance >>]→[Delete certificates>>].
2. Select the certificates you want to delete. If you want to deselect certificates, select [Reset] and reselect the desired
items.
3. Select [Delete]. The certificates selected will be deleted from the monitor and will disappear from the [CA Certificate]
drop-down list.
3.2.9 Setting the Network Service Quality Level
To set the quality of service (QoS):
1. Select [Main Menu]→[Maintenance>>]→[User Maintenance>>]→enter the required password.→[Network
Setup >>]→[QoS Setup >>].
2. Select the desired value for [Realtime Monitoring]. This sets the service quality of network connection for important
realtime network transactions such as parameter measurements, waveforms, and alarms. The value ranges from 0 to 7.
The greater the value, the higher priority the network transaction.
3. Select the desired value for [Others]. This sets the service quality of network connection for secondary non-realtime
network transactions such as transferring history data from the monitor to the CMS. The value ranges from 0 to7. The
greater the value, the higher priority the network transaction.
To Next Page
Loading...
Need help?
General
