Minebea Intec Combics Series User Manual

14
Service Manual Combics
Important!
h
The Service password can be entered via the decimal keypad on Combics 2 series
indicators.
For Combics 1:
t Use the k key (or p key) to select 2 and confirm with the ) key, the cursor
moves to the second digit, enter the next number. This is how you enter the service
password (202122).
Important!
h
If a number is entered incorrectly in a column, you can use the ( key to
select and change the number (column). Then scroll to the sixth column
(number 2 flashes) by pressing the ) key several times.
t After entering the last number, press the ) and ( keys (in that order) to activate
the service mode.
y When the service mode is active, an S appears in the top right of the display.
t If the entry routine of the service password is interrupted, keep pressing the ( key
until "U-CODE" (user code) reappears on the display.
Important!
h
You can only exit the service mode by turning the Combics indicator off and
then on.
The service code (202122) can only be used to view the entered
customer password. The customer password can only be deleted by
entering the General password (40414243).
Operating Design | Service Mode Combics1 | 2
disp_202122_d.eps
disp_blin_d.eps
disp_u-code_s_d.eps
.

Minebea Intec Combics Series Specifications

General

Brand	Minebea Intec
Model	Combics Series
Category	Scales
Language	English