44
Service Manual Combics
If the device is equipped with a digital PCB with screw terminals, then the electrical
connections must be established at the screw terminals of the PCBs. The connections are
listed in the following table:
Test Adapter for Option A6/A62 (RS-232)
Adapter for interface options A6 and A62 (connection for IS platforms).
Screw terminals are only available for this interface option.
Important!
h
No adapter is required for option A7/A72.
Operating Design | Error Description Test Combics | 1 | 2 | 3
To Next Page
Loading...
Need help?
General
