2. Safety instructions | 2.4 - Before operational startup | 15
2.4.8.2 Electrostatically sensitive components
This device contains electrostatically sensitive components. Therefore,
potential equalization must be provided when working on the device
(antistatic protection).
2.4.8.3 Replacing fuses
WARNING
Damage from overheating.
The use of repaired fuses and bypassing the fuse holder is
prohibited.
Only the fuses listed in ChapterGeneral technical data are
permissible.
Disconnect the device from the supply voltage before removing/replacing the
fuse.
To Next Page
Loading...
Need help?
General
