135
EVF AUTO SWITCH
This option controls the auto-display function in the recording and
movie mode (p. 39). Two setting are available:
Auto EVF/LCD - the EVF’s eye sensors switch between the EVF and
LCD monitor automatically.
EVF auto on - the LCD monitor is turned off and the eye and grip sen-
sors activate the EVF when in use. This setting will help conserve bat-
tery power. The grip sensor can be disabled in section 4 of the setup
menu.
LANGUAGE
The language used in the menus can be changed.
VIDEO OUTPUT
Camera images can be displayed on a television (p. 128). The video output can be changed between
NTSC and PAL. North America uses the NTSC standard and Europe uses the PAL standard. Check
which standard is used in your region to play back images on your television set.
To Next Page
Loading...
Need help?
General
