45
The display-information button controls what information is displayed with
the live image. Each time the button is pressed, the display cycles to the
next format: standard display, real-time histogram, focus frame, and live
image only.
The real-time histogram shows the approximate luminance distribution of the live image. This his-
togram will not be accurate when the monitor image is amplified (p. 34, 104), or the built-in or a com-
patible Minolta flash unit is used. The histogram of a recorded image may not show the same distri-
bution as the real-time histogram.
ADVANCED RECORDING
This section contains detailed information on the camera’s recording functions and operation. Read
the sections pertaining to your interest and need.
DISPLAY-INFORMATION BUTTON - CHANGING THE DISPLAY
Standard display Focus frame only Live image onlyReal-time histogram
Scale
Grid
To display a grid or scale over
the display formats, press and
hold the function button (1)
and press the display-informa-
tion button to cycle through
the options: grid, scale, and
off.
1
To Next Page
Loading...
