96
R
ECORDING MENU
INTERVAL SETUP
The parameters for the interval drive mode (p. 66) are set in section 2 of the recording menu (p. 80).
Int. set
Bracket set
Enter
Select “Enter” in the interval-set option in section 2 of
the recording menu. Press the center of the controller
to open the setup screen.
Interval 1 min
No.of frames 2
Start time No delay
:enter
Int. set
On the setup screen, use the up/down controller keys
to highlight the parameter to be changed and then
press the right controller key. Use the up/down keys to
change the parameter. Use the left controller key to
return to the parameters. Continue until the parameters
are set.
press the center of the controller to complete the operation. The menu button closes the
screen and cancels any changes.
BRACKETING SETUP
0.3 Ev
bracket
0.5 Ev
bracket
Normal
Under
Over
When making an exposure bracket (p. 62), the exposure difference among frames can be set to
0.3EV or 0.5Ev. This is set in section 2 of the recording menu (p. 80).
To Next Page
Loading...
Need help?
General
