INSTALLING AND CHANGING THE BATTERY
Open the battery-chamber door by sliding the battery-chamber
lock to the open position.
Insert the battery with the battery contacts first. Insert the bat-
tery so that it slides past the battery latch in the chamber. Push
the battery into the chamber until the latch clicks into place.
This digital camera uses one NP-400 lithium-ion battery. Before using the battery, read the safety
warnings on pages 4 of this manual. When replacing batteries, the camera should be off.
To remove a battery, slide the battery latch to the side of the bat-
tery chamber; the battery will spring out.
Close the battery-chamber door and slide the battery-chamber
lock to the close position.
23
To Next Page
Loading...
Need help?
General
