142
S
ETUP MENU
AUTO POWER SAVE
The camera will turn off the monitors to conserve battery power if no operation is made within a cer-
tain period. The length of this period can be changed to 1, 3, 5, or 10 minutes. To restore power,
press the shutter-release button partway down or press the main switch. When the camera is con-
nected to the computer, the auto-power-save period is set to ten minutes. This period cannot be
changed.
If an operation is not made within thirty minutes, the camera will shut down. Press the main switch to
restore power.
SHUTTER FX
VOLUME
The volume of the audio signals and sound effects can be
increased or decreased in section 3 of the setup menu (p. 130). If
the volume is turned off, the audio signals, focus signal, and shutter
FX are disabled.
A shutter sound effect gives positive audio confirmation
when the shutter is released. The sound effects can be
turned off in section 3 of the setup menu (p. 130). Two shut-
ter effects are available. Signal 1 uses the shutter sound
from the Dynax/Maxxum 9 SLR. Signal 2 uses a mechanical
shutter sound taken from the legendary Minolta CLE.
Reset default
–
Audio signals 1
Focus signal 1
Shutter FX 1
Volume 2
Power save 3 min.
To Next Page
Loading...
Need help?
General
