66
A
DVANCED RECORDING
INTERVAL
The interval mode makes a series of still or moving images over a period of time. Similar to time-
lapse photography, a series of images of a slow moving event can be taken: the blossoming of a
flower, the construction of a building. The built-in flash can be used. Instant playback (p. 100) is dis-
abled.
The parameters of the interval series is set up in section 2 of the recording menu. The length of the
interval between frames, the number of frames in the series, and the start time are set with the
menu. See page 96.
Interval - to create a series of still images specified within the parameters set on the recording
menu.
Interval and time-lapse movie - to create a series of still images and a 640 X 480 movie clip speci-
fied within the parameters set on the recording menu. The movie file is played back at four frames
per second.
Turn the function dial to the drive mode position (1).
Press the function button in the center of the dial (2).
Turn the front control dial to select the interval drive
mode (3). Use the rear control dial (4) to switch between
the two interval modes. Press the shutter-release button
partway down or press the function button to set the
mode.
Interval
Interval and time-lapse movie
Number of frames in the interval series
Frame counter
1
2
3
4
To Next Page
Loading...
Need help?
General
