95
RECORDING MODE RESET
The recording mode functions can be reset in section 1 of the recording menu (p. 80). When select-
ed, a confirmation screen will appear; choosing “Yes” resets the following functions and settings, “No”
cancels the operation.
Exposure compensation 0.0 p. 59
Flash compensation 0.0 p. 59
Drive mode Single-frame advance p. 61
Anti-shake On p. 37
White balance Auto p. 70
White-balance shift 0 p. 70
Metering mode Multi-segment p. 69
Contrast compensation 0 p. 78
Color-saturation compensation 0 p. 77
Filter 0 p. 78
Focus area Wide focus frames p. 33
Flash mode Fill flash or red-eye reduction
1
p. 86
Flash control ADI p. 92
Sharpness Normal p. 97
1. The flash mode is reset to whichever of the two modes was last set.
Button shortcuts can be used to reset the recording mode (p. 132). The confirmation screen will not
appear in the shortcut operation.
To Next Page
Loading...
Need help?
General
