111
+2.0 Ev
+1.0 Ev
0.0 Ev
–1.0 Ev
–2.0 Ev
4X as much light
2X as much light
1/2 as much light
1/4 as much light
Calculated exposure
WHAT IS AN EV?
Ev stands for exposure value. A change
of one Ev will adjust the exposure calcu-
lated by the camera by a factor of two.
LIGHT SOURCES AND COLOR
The human eye adapts itself extremely well under different conditions. The paper of this manual you
are reading looks white regardless of the type of lighting. Photographic systems are much less flexi-
ble. As the light source changes, so does the overall color of a scene - fluorescent office ceiling lights
create a green cast to pictures, regular household tungsten light bulbs make everything red. The
camera’s white-balance controls adjust for different lighting like your eyes to make natural looking pic-
tures.
The most common source of light, our sun, changes color depending on the time of day and the
atmospheric conditions. The sun is of course very warm near the horizon and very blue at noon. The
daylight preset white-balance setting is for beautiful sunny days. When the weather is overcast, the
color is cooler. When the main light source is skylight, light from the blue sky rather than the direct
light of the sun, the resulting color is very blue.The shade preset white-balance is designed for this
condition.
Artificial lighting is more consistent but will show variations.Tungsten lamps become warmer as their
wattage decreases. And fluorescent lamps come in classifications that define their color.The preset
white balance settings can be adjusted with the rear control dial (p. 70) to match the change in these
light sources.
Some artificial lighting have a discontinuous spectrum that create very unnatural color in a photo-
graph. White balance cannot correct high-energy vapor lighting: sodium-vapor (yellow highway lights),
or mercury vapor. For portraits under these lighting conditions, the flash can be used to overpower
the ambient light. With landscapes containing these types of lights, set the white balance to the pre-
set daylight setting.
To Next Page
Loading...
Need help?
General
