Minolta Dimage G500 - Make so the Image Information Is Not Displayed

101
Using the Set-up Menu (Cont’d)
Make so the Image Information is not displayed
-You can set the camera not to display information (p.36, 71) during shooting
or play back.
- The default setting is “ON” (display).
1. Select “INFO DISP” and press .
Use  or  to select “OFF”, and press  or
the MENU/SET button. The setting is
completed and the screen will return to the
set-up menu.
• If you press , the setting is invalidated and you
return to the Set-up menu.
1