Minolta Dimage G500 - Adjusting White Balance

52
Using the REC Menu (Cont’d)
Adjusting White Balance
- The color tone of your photos will change according to the kind of light
source. While the “AUTO” mode can be used in almost all instances, you
can alter the white balance settings to suit the environment and lighting
when you take a picture.
- The mode you set is displayed with icon on the monitor.
1. Select “WHITE BALANCE” and press .
2. Use  or  to select the desired mode, then
press either  or the MENU/SET button.
The setting is completed and you will return
to screen 1.
• If you press , the selection is invalidated and
you will return to screen 1.
•To return to normal still-image shooting, set the
mode to “AUTO”.
1
2