Minolta Dimage G500 - Setting the Operation Sounds

102
Setting the Operation Sounds
-You can turn on and off the beeps (sounds made for each type of operation
and warnings), the shutter sound, or the sound effects.
- The default setting is turned “ON” (set to sound).
Using the Set-up Menu (Cont’d)
1. Select “SOUND”, press  and the settings
screen appears. “BEEP” is selected, so
press .
2. Using  or , select “OFF” or “ON” and
press either  or the MENU/SET button. You
will return to screen 1.
• If you press , the setting is invalidated and you
return to screen 1.
3. Returning to screen 1, select “EFFECT”.
Then the shown left (screen 3) appears. After
pressing , use  or  to select “OFF” or
“ON”. Then press either  or the MENU/SET
button and you will return to screen 1.
• If you press , the setting is invalidated and you
return to screen 1.
4. Select “SHUTTER” on screen 1 and then
press . Use  or  to select “ON” or “OFF”,
and then press  or the MENU/SET button.
The settings are complete and you return
to screen 1.
• If you press , the setting will be invalidated
and you will return to screen 1.
1
2
3
4