Blinks
11
Viewfinder
• When the flash signal does not blink after taking the picture, the subject was
not within the flash range. Please check the flash range (p. 32).
Wide focus frame (28)Spot-focus area (46)
Flash signals (33) Focus signals (29)
Flash output was sufficient to provides correct expo-
sure.
Steady
Flash is charged and will fire when the shutter-
release button is pressed.
Flash signals
Focus is confirmed with a moving subject. The camera
continues to focus while the shutter-release button is
pressed partway down.
Steady
Focus is confirmed and locked.
Focus cannot be confirmed.
• The shutter is locked (p. 31).
Blinks
Steady
Focus signals
To Next Page