33
Flash Signals
When the shutter-release button is pressed partway
down, the viewfinder flash signal indicate the status
of the flash.
• Remove the lens hood before using the built-in flash.
• Lens shadowing may occur with the following lenses at the shorter focal
lengths.
AF Zoom 28-70mm f/2.8G
AF Zoom 17-35mm f/3.5G
AF Zoom 28-135mm f/4.0-4.5
AF Zoom 28-85mm f/3.5-4.5
• The built-in flash can not be used with the following lenses:
AF 300mm f/2.8 (APO tele)
AF 600mm f/4.0 (APO tele)
Lens shadowing occurs when the lens or lens hood blocks part of the
output from the built-in flash. Lens shadowing appears as a semi-cir-
cular shadow area at the bottom (horizontal pictures) or side (vertical
pictures) of the image.
Lens Shadowing
Blinks
•Ifflash signal does not blink after taking the picture, the subject was not
within the flash range. Please check the flash range (p. 32).
The signal will blink after taking the picture to indicate the
flash output was sufficient to provide the correct exposure.
Steady Flash is charged and ready to fire.
To Next Page
Loading...
Need help?
General
