Minolta DYNAX 3L - QUICK OPERATION; Initial Setup Steps

12
QUICK OPERATION
1. Insert the batteries (p.
14).
• This camera uses two CR2
lithium batteries.
3. Attach the lens (p. 22).
• Align the red mounting index on the lens
with the one on the camera. Carefully
insert the lens into the mount and turn it
clockwise until it clicks into the locked
position.
4. Slide the main switch to the on
position.
2. If the camera is the quartz date
model, set the date and time,
and imprinting format (p. 16).
• The clock and calendar are powered
by the camera’s batteries.
2165_E.qxd 03.2.10 2:06 PM Page 12