14
BATTERIES
GETTING STARTED
Installing the Batteries
2. Insert the batteries with the polarities
as indicated by the illustration next to
the battery chamber.
3. Close the battery-chamber door and
push until it clicks into place.
The camera uses two 3V CR2 lithium batteries to supply power for all camera
operations.
• Setting the camera down with the battery-chamber door open may damage
the camera.
• Read
the
for proper and safe use section
(p. 5)
before using batteries.
1. Slide the battery-chamber release as
shown, and open the door.
To Next Page
Loading...
Need help?
General
